[H2L]

@Kyle Goodridge

Thanks for posting. The UnlimitedHand runs at a maximum of 16MHz.

Best,
UnlimitedHand team

[H2L]

@EQ_Tatsuguchi,

Thanks for the inquiry.
We made changes to the way the angles are obtained in previous versions of the UH unity plugin. Arduino library v.0044 should work fine. Would you let me know which version of the UH unity plugin you are using?

Best,
UnlimitedHand team

[H2L]

@Kyle Goodridge

Thanks for the inquiry, and sorry to have keep you waiting.
We will ship you the missing velcro strap early next week.

UnlimitedHand team

[H2L]

@davideperrotta thank you for the inquiry.

The Processing library would require an update before being able to cater to your needs in the robotic arm project. We will begin working on it and notify you once it is ready.

I would suggest you try controlling the robot arm through Arduino. We are now also in the process of preparing demo projects that utilize the I2C communication protocol that allows the UH to control other hardware.

UnlimitedHand team

[H2L]

@EQ_Tatsuguchi

Thank you for your inquiry.
I understand that you wish to refer to the Unity code of the calibration test. Since we are still optimizing the software for calibration, we plan to publish the full version in a few months from now. Once it is released, we will open a new thread as a notification.Sorry for the inconvenience.

UnlimitedHand team

[H2L]

@yunhan0 Thank you for the inquiry.

Within our latest Unity plugin ver43, there are the functions setVoltageLevelUp() and setVoltageLevelDown(). These functions can be called to configure the intensity of the stimulation.

There are also the functions setSharpnessLevelUp() and setSharpnessLevelDown() which can be used to configure the pulse width of the stimulation.

At the moment there are no functions to configure directly stimulationTime from Unity.
You would have to set it through Arduino’s uh.stimuTimeCount.

Let me know if you have further questions!
UnlimitedHand team

[H2L]

@kumadasu:

The current version of UnlimitedHand is not capable of outputting via multiple channels due to safety limit of the multiplexer.

If you are a researcher and would like to deliver stimulus via 2 channels at the same time, we do have another device “PossessedHand” which is capable of doing so.

UnlimitedHand team

[H2L]

@mah

Thank you for your inquiry.
The S-Size pad is not being sold at the moment, though we do have plans to release during next year’s Tokyo Game Show. If the device is too long, you may consider wearing the device closer to the elbow, the thicker part of your arm. Doing so will not prevent the device from functioning normally.

Best,

UnlimitedHand team.

[H2L]

@mah

Thank you for pointing out the mistake, we have updated the code accordingly.
The latest version of the Arduino Library can be found here:
http://dev.unlimitedhand.com/download.html

much appreciated.

[H2L]

Thanks @kumadasu for your inquiry.

I understand that you wish to deliver stimulus through multiple output channels.
We are using 72V analog 8-to-1 multiplexers.

Let us know how you plan on doing the modification and the type of information
that you might need so we can better facilitate your project.

UnlimitedHand team.

• This reply was modified 8 years, 1 month ago by H2L.

[H2L]

@Akira

Thank you for the reminder, we checked the plugin and updated the download link.

Sorry for the trouble, we shall pay closer attention.

UnlimitedHand team.

[H2L]

@MCC Katsura

The pages have been re-linked, thank you for the kind reminder!

UnlimitedHand team

[H2L]

@MCC_Katsura
Thanks for the inquiry.We have made a minor bug fix to the Unity Plugin (ver.0039).
Please use this updated version of the library to run the sample once again:
LINK: http://dev.unlimitedhand.com/UH_Unity0039.zip

– Unzip the file, to reveal a file named “UH.cs”.
– Navigate to “SuperSimpleSample002/Assets/“.
– Replace the file UH.cs found inside this directory with the newly unzipped UH.cs.
– Make sure the UnlimitedHand object in Unity has been fitted with the UH.cs script
– Try running the project once again.

As a suggestion, please keep your forearms held by your side as the message “Please lower down your forearms for calibration” appears. Once the value reaches 10 or over, you may lift your arm up to face the screen. By doing so, the calibration process will end, and you will be able to fire the pistol.

Sorry for the trouble,
UnlimitedHand team.

[H2L]

@jeffman
ご返事ありがとうございます。

プログラムをアップロードするため基板のリセット回路の起動が必要なので書き込みはUSB接続で行ってください。
BluetoothでUnlimitedHandを使用する場合はペアリングが必要です。デバイスに特定なペアリングコードが設定されていないので”デバイス追加画面”で3の「ペアリングにコードを使用しない」を選択してください。またペアリングコードを要求される場合は「0000」を使用してください。お手数をおかけして申し訳ありません。よろしくお願い致します。

UnlimitedHand team.

[H2L]

ご質問ありがとうございます。
@backer286さんが使われているライブラリー(ver.0036)はArduino IDE 1.6.9までの対応となっております。 最新版(ver.0038)のUHライブラリーをダウンロードいただければ, Arduino IDE 1.6.10でもコンパイルすることができます。

リンク: http://dev.unlimitedhand.com/UH4Arduino0038.zip

お手数をおかけして申し訳ありません。よろしくお願い致します。
UnlimitedHand team.

—————————————-

Thanks for pointing out the problem!

The library that you are using (ver.0036) is not compatible with newer versions of the Arduino IDE yet, which is why compilation errors are appearing. Please download the latest version (ver.0038) for it to work with Arduino IDE ver 1.6.10 ~ 1.6.11.

Link: http://dev.unlimitedhand.com/UH4Arduino0038.zip

UnlimitedHand team.

[Author]

Posts