Thanks for posting. The UnlimitedHand runs at a maximum of 16MHz.

Best,
UnlimitedHand team

From the data that you have provided:
234_215_285_0_385_306_193_234

I am assuming that there might be hardware issues with photoreflector no.3

Are you residing in Japan?
Perhaps you can send us your device so we can perform a hardware check for you.

Best,
UnlimitedHand team

Thanks for the information.
From the data that you provided, it shows that the device is in fact outputting values into Unity, so the following setup should work.

A1) “Serial_Unity_Quaternion” in UH4Arduino0041.zip
U1) UH.cs: ver 0040(preset in UHDemo_GrapQuaternion40

However the 0 value of PR[3] does look odd. In section 1.0…[Read more]

U1+A1 works fine on our environment.
U1+A2 is not always outputting muscle motion sensor values, we will fix it up.

Could I suggest that you try the following steps:

1. Compile “Serial_Unity_Quaternion” version UH4Arduino0041
2. Open up the serial monitor
3. input the character ‘c’

Please tell me if you see the values and if…[Read more]

We have updated the Graph Demo, please download the project and try once more.
http://dev.unlimitedhand.com/unitycontents.html

Arduino v.0044
Unity Plugin: Use the default plugin included inside the Project.

Please let me know if it works for you.

Best,
UnlimitedHand team.

I will investigate the problem with the Graph Project and get back to you as soon as possible.

UnlimitedHand team

Thanks for the inquiry.
We made changes to the way the angles are obtained in previous versions of the UH unity plugin. Arduino library v.0044 should work fine. Would you let me know which version of the UH unity plugin you are using?

Best,
UnlimitedHand team

Thanks for the inquiry.
I understand that you are not getting readings for your muscle motion sensors.

UH v0044 is the latest update. It is tested to be working fine.
May I know which version of the UH Unity Plugin are you using?

Best,
UnlimitedHand team

Thanks for the inquiry, and sorry to have keep you waiting.
We will ship you the missing velcro strap early next week.

UnlimitedHand team

The Processing library would require an update before being able to cater to your needs in the robotic arm project. We will begin working on it and notify you once it is ready.

I would suggest you try controlling the robot arm through Arduino. We are now also in the process of preparing demo projects…[Read more]

Thank you for your inquiry.
I understand that you wish to refer to the Unity code of the calibration test. Since we are still optimizing the software for calibration, we plan to publish the full version in a few months from now. Once it is released, we will open a new thread as a notification.Sorry for the inconvenience.

UnlimitedHand team

Within our latest Unity plugin ver43, there are the functions setVoltageLevelUp() and setVoltageLevelDown(). These functions can be called to configure the intensity of the stimulation.

There are also the functions setSharpnessLevelUp() and setSharpnessLevelDown() which can be used to configure the pulse…[Read more]

The current version of UnlimitedHand is not capable of outputting via multiple channels due to safety limit of the multiplexer.

If you are a researcher and would like to deliver stimulus via 2 channels at the same time, we do have another device “PossessedHand” which is capable of doing so.

UnlimitedHand team

Thank you for your inquiry.
The S-Size pad is not being sold at the moment, though we do have plans to release during next year’s Tokyo Game Show. If the device is too long, you may consider wearing the device closer to the elbow, the thicker part of your arm. Doing so will not prevent the device from functioning…[Read more]

Thank you for pointing out the mistake, we have updated the code accordingly.
The latest version of the Arduino Library can be found here:
http://dev.unlimitedhand.com/download.html

much appreciated.

This new sample allows you to synchronize the movement of your actual fingers with those from an avatar on the screen. Virtual objects can be picked up as if using your own…[Read more]

This new sample allows you to synchronize the movement of your actual fingers with those from an avatar on the screen. Virtual objects can be picked up as if using your own…[Read more]

I understand that you wish to deliver stimulus through multiple output channels.
We are using 72V analog 8-to-1 multiplexers.

Let us know how you plan on doing the modification and the type of information
that you might need so we can better facilitate your project.

UnlimitedHand team.

I understand that you wish to deliver stimulus through multiple output channels.
We are using 72V analog 8-to-1 multiplexers.

Let us know how you plan on doing the modification and the type of information
that you might need so we can facilitate your project with technical details.

UnlimitedHand team.

Thank you for the reminder, we checked the plugin and updated the download link.

Sorry for the trouble, we shall pay closer attention.

UnlimitedHand team.

The pages have been re-linked, thank you for the kind reminder!

UnlimitedHand team

– Unzip the file, to reveal a file named “UH.cs”.
– Navigate to “SuperSimpleSample002/Assets/“.
– Replace the file UH…[Read more]

プログラムをアップロードするため基板のリセット回路の起動が必要なので書き込みはUSB接続で行ってください。
BluetoothでUnlimitedHandを使用する場合はペアリングが必要です。デバイスに特定なペアリングコードが設定されていないので”デバイス追加画面”で3の「ペアリングにコードを使用しない」を選択してください。またペアリングコードを要求される場合は「0000」を使用してください。お手数をおかけして申し訳ありません。よろしくお願い致します。

UnlimitedHand team.

リンク: http://dev.unlimitedhand.com/UH4Arduino0038.zip

お手数をおかけして申し訳ありません。よろしくお願い致します。
UnlimitedHand team.

—————————————-

Thanks for pointing out the pr…[Read more]

ぜひ試されてください。よろしくお願い致します。
UnlimitedHand team.

今までのArduinoライブラリーはIDE 1.6.9まで対応しますので、
IDEを1.6.10から1.6.9にバージョンダウンすればコンパイルできます。

よろしくお願い致します。

——————————

backer286,
Thank you for your question concerning the inability to compile Arduino Sketches.
At the moment, the Arduino Library for UnlimitedHand only supports up to version 1.6.9.
of the Arduino…[Read more]

SOFTWARE DEVELOPMENT UPDATE:

Apologies for the delayed development with the Sensor Calibration and Feedback kit.
We are in the process of conducting tests to ensure consistency.

Lately, our team has been finishing off and debugging the long awaited Unreal Engine 4 Plugin for UnlimitedHand. It will be fit for release by the end…[Read more]

Thank you for your question. When you wish to move the hands,
wrist or fingers of the wearer, a few things need to be done with the code.

– Initialize EMS
– Configure EMS parameters (intensity and duration)
– Pick the electrode you wish to deliver EMS with.
– Update EMS

The following sample shows how a single…[Read more]

Thank you for your question. When you wish to move the hands,
wrist or fingers of the wearer, a few things you need to done in the code.

– Initialize EMS
– Configure EMS parameters (intensity and duration)
– Pick the electrode you wish to deliver EMS with.
– Update EMS

The following sample shows how a single instance…[Read more]

Download the latest Arduino Library here to solve the…[Read more]

Download the latest Arduino Library here to solve the…[Read more]

Thanks for the post, your measurements are noted and will be reflected in the design.

UnlimitedHand team

@jeffman
Im glad that it has finally worked out.
Thanks for raising the problem!

@jeffman
ご返信ありがとうございます。jeffmanさんのArduino開発環境はバージョン1.6.8(Windows 7)のことを分かりました。WindowsユーザーがArduinoIDEを使用する時前に、FTDIドライバを…[Read more]

@jeffman
Thank you for your reply,

I would need information about your PC and UnlimitedHand to troubleshoot further,
would you mind answering the following questions ?

1. Was your UnlimitedHand powered on when you upload the Arduino code?
※ UnlimitedHand should be turned on (Green LED visible) when you u…[Read more]

If you have chosen other boards, you may receive the following error message:
avrdude: stk500_getsync() attempt 1 of 10: not in sync:…[Read more]

@jeffman:
スケッチの書き込みがうまくいかない場合は, 電源ボタンを長押ししてデバイスの電源切ってデバイスを再び起動してください。
このページの「トラブルシューティング: スケッチの書き込みに失敗する」をご確認ください。http://dev.unlimitedhand.com/ja/introduction/sketch.html　
(日本語)

@jeffman:
In this case, you may try restarting the Unlimited…[Read more]

@jeffman:
スケッチの書き込みがうまくいかない場合は, 電源ボタンを長押ししてデバイスの電源切ってデバイスを再び起動してください。
このページの「トラブルシューティング: スケッチの書き込みに失敗する」をご確認ください。http://dev.unlimitedhand.com/ja/introduction/sketch.html　
(日本語)

@jeffman:
In this case, you may try restarting the Unlimited…[Read more]

@jeffman:
スケッチの書き込みがうまくいかない場合は, 電源ボタンを長押ししてデバイスの電源切ってデバイスを再び起動してください。
このページの「トラブルシューティング: スケッチの書き込みに失敗する」をご確認ください。http://dev.unlimitedhand.com/ja/introduction/sketch.html　(日本語)

@jeffman:
In this case, you may try restarting the UnlimitedH…[Read more]

Thanks for the input (at last!),

It is noted that you wish for us to elaborate on the following:

– Generate and manage hand movements by creating a control panel that can toggle and tweak stimulation patterns.

– Mobile Development for the UnlimitedHand.

UnlimitedHand Team

Thanks for raising the question, replying to this thread will be fine!

Your measurements are noted, we will take them into consideration when
deciding upon the dimensions of the S-sized silicone pad.

UnlimitedHand Team

Perhaps, as one idea for a Grand Prize, we can showcase your game or interactive systems at our booth for hundreds of attendees to see and experience!

How does that sound…[Read more]

Perhaps submissions could be made in the form of demo videos that describe the workings of your hack. Source codes may be attached…[Read more]

Perhaps submissions could be made in the form of demo videos that describe the workings of your hack. Source codes may be attached…[Read more]

Perhaps submissions could be made in the form of demo videos that describe the workings of your hack. Source codes may be attached…[Read more]

Perhaps submissions could be made in the form of demo videos that describe the workings of your hack. Source codes may be attached…[Read more]

> The Sensor Calibration Kit will help users gain dexterity over their virtual hands by providing a set of tools to familiarize them with the device’s input c…[Read more]

> The Sensor Calibration Kit will help users gain dexterity over their virtual hands by providing a set of tools to familiarize them with the device’s input c…[Read more]

> The Sensor Calibration Kit will help users gain dexterity over their virtual hands by providing a set of tools to familiarize them with the device’s input c…[Read more]