Don't work EMS ch7 for Test Mode 4(TestMode.ino)

[mah]

Don’t work EMS ch7 for Test Mode 4.
Is it this?

[UH4Arduino0043a/UH/examples/Serial_Unity_Quaternion/TestMode.ino]
—————————————-
[before]
} else if (EMSCh == 6) {
// EMSTimeCount =stimuTimeCount;
uh.currentEMSChannel = 6;
for(int i=0;i<20;i++){uh.keepVoltage(currentVol);}
Serial.print(“Vol:”); Serial.print(currentVol);
Serial.print(“, EMS num: “); Serial.println(uh.currentEMSChannel);

} else if (EMSCh == 7) {
// EMSTimeCount =stimuTimeCount;
uh.setStimulationChannel(6);
uh.setStimulationTime();
uh.setStimulationVoltage(currentVol);
for(int i=0;i<20;i++){uh.keepVoltage(currentVol);}
Serial.print(“Vol:”); Serial.print(currentVol);
Serial.print(“, EMS num: “); Serial.println(uh.currentEMSChannel);
}

—————————————-
[after?]
} else if (EMSCh == 6) {
// EMSTimeCount =stimuTimeCount;
uh.setStimulationChannel(6);
uh.setStimulationTime();
uh.setStimulationVoltage(currentVol);
for(int i=0;i<20;i++){uh.keepVoltage(currentVol);}
Serial.print(“Vol:”); Serial.print(currentVol);
Serial.print(“, EMS num: “); Serial.println(uh.currentEMSChannel);
} else if (EMSCh == 7) {
// EMSTimeCount =stimuTimeCount;
uh.setStimulationChannel(7);
uh.setStimulationTime();
uh.setStimulationVoltage(currentVol);
for(int i=0;i<20;i++){uh.keepVoltage(currentVol);}
Serial.print(“Vol:”); Serial.print(currentVol);
Serial.print(“, EMS num: “); Serial.println(uh.currentEMSChannel);
}
—————————————-

Thanks.

[H2L]

@mah

Thank you for pointing out the mistake, we have updated the code accordingly.
The latest version of the Arduino Library can be found here:
http://dev.unlimitedhand.com/download.html

much appreciated.

[mah]

Hello,
I confirmed that.

Thanks.

[Author]

Posts